what do you do when your keurig says not ready

what do you do when your keurig says not ready

Common Problem 1: K-Cup Coffee and Tea Grounds Get into Your K-Cup Holder and Causes a Water Line Clog

Keurig Troubleshooting Solution: Remove or clean the needle that punctures the K-Cup Pod then do a small cup cleansing brew to clean out any residual. This will ensure any left-over debris is flushed out before you have you start your next brew.

My Keurig will not brew, it continually says Not Ready. Cleaned all parts and wonder if it is the heating element.

This happened to my mom’s Keurig too. Fixed it by emptying the water tank and the K-Cup chamber and leaving it unplugged for the night. It is likely the heating element or a clogged pump if this does not fix it.

Keurig Platinum Reset for the Not Ready Light

FAQ

What to do when Keurig says not ready?

Keurig Troubleshooting Solution: Simply add more water to the reservoir. All K Cup Coffee Maker models need a minimum amount of water to activate the brewing process, so if you’re reservoir is low the machine will not start.

How do I force my Keurig to descale?

To activate Descale Mode, begin with the brewer plugged in and powered off, then press and hold the 8oz and 12oz buttons together for 3 seconds. When flashing, press the brew button to start the descaling process.

How do you tell if your Keurig is clogged?

If your Keurig suddenly stops brewing full cups of coffee, you may have a clog. This is a common problem that is fixable after washing all the removable parts with dish soap and hot water. Most clogs caused by coffee grounds are easy to break up with nothing more than a paperclip and a plastic straw.

Why is my Keurig not ready?

Common Problem 3: Not Ready Message on Your Keurig Machine Stays On Insert the water reservoir then press the menu button and when the “Not Ready” message appears lower handle Keurig Troubleshooting Solution: Simply add more water to the reservoir.

Why is my Keurig B60 not ready?

That also means servicing, caring for, or even needing to fix Keurig coffee maker from time to time. The Keurig B60 Not Ready display message means your Keurig must be fixed before it can operate again. Causes for this message can range from heavy use to power surges, but there are a couple of potential fixes.

How do I Reset my Keurig?

You can simply select the factory reset option in the LCD menu. But you don’t have that advantage if you have one of the older or less expensive models, such as K-Slim and K-Mini. Turn off your Keurig machine and unplug it. Remove its water tank. Keep it unplugged for a while with an unattached reservoir. Turn on your Keurig coffee maker.

How to reboot a Keurig B60?

These are the steps required to do a basic reboot on a Keurig B60 to clear that aggravating Not Ready display. Turn the coffee maker off using the power button above the display panel. If the coffee maker won’t turn off then proceed to step two. Remove the power cord of the B60 from the outlet.

Leave a Comment