Majestic gas fireplaces are a popular choice for homeowners looking for a convenient and stylish way to heat their homes. However, if you’re new to using a gas fireplace, you may be wondering how to light the pilot. In this guide, we’ll walk you through the steps on how to light the pilot on a Majestic gas fireplace, as well as provide some troubleshooting tips in case you encounter any problems.
Materials You’ll Need
- A long lighter or match
- A screwdriver (optional)
Safety Precautions
- Before you begin, make sure that the gas supply to your fireplace is turned off.
- Never attempt to light the pilot if you smell gas. If you do smell gas, turn off the gas supply and call a qualified technician immediately.
- Keep children and pets away from the fireplace while it is lit.
Step-by-Step Instructions
- Locate the pilot assembly. The pilot assembly is usually located at the bottom of the fireplace, behind the grate. It consists of a small metal tube with a spark igniter and a flame sensor.
- Turn on the gas supply. Once you have located the pilot assembly, turn on the gas supply to your fireplace. You should hear a hissing sound as the gas begins to flow.
- Push in the control knob and turn it to the “Pilot” setting. This will open the gas valve and allow gas to flow to the pilot assembly.
- Hold the lighter or match near the spark igniter. The spark igniter is located at the end of the pilot tube. Hold the lighter or match near the spark igniter and press the ignition button. You should see a spark and hear a clicking sound.
- Keep the control knob pressed in for 30 seconds. This will allow the flame sensor to heat up and open the main gas valve.
- Turn the control knob to the “On” setting. Once the main gas valve is open, you can turn the control knob to the “On” setting. The fireplace should now be lit.
Troubleshooting Tips
- If the pilot does not light, repeat steps 3-6. Make sure that you are holding the lighter or match near the spark igniter and that you are pressing the ignition button.
- If the pilot lights but then goes out, check the flame sensor. The flame sensor is located at the end of the pilot tube. If the flame sensor is dirty or damaged, it may not be able to detect the flame and keep the main gas valve open.
- If you cannot get the pilot to light, call a qualified technician. There may be a problem with the gas supply, the ignition system, or the flame sensor.
Lighting the pilot on a Majestic gas fireplace is a simple process that can be completed in a few minutes. By following the steps outlined in this guide, you can safely and easily light your fireplace and enjoy the warmth and ambiance of a real fire.
How to light the pilot on a gas fireplace
FAQ
How do I relight the pilot light on my gas fireplace?
Why wont the pilot light come on in my gas fireplace?
How do you light a pilot on a majestic gas fireplace?
To light the pilot on a Majestic gas fireplace, first make sure the gas valve is in the “off” position. Then locate the pilot assembly and turn the knob to “pilot.” Press and hold down the knob while using a lighter or match to light the pilot. Once the pilot is lit, continue to hold the knob down for 30 seconds before releasing it.
How do you ignite a gas fireplace?
Turn on the gas valve to start the flow of gas to your pilot assembly. Turn the control knob to “pilot.” Push in and hold the pilot control knob. Click the igniter button to light the pilot. This may take a few clicks if your fireplace hasn’t been used in a while.
How do you light a gas fireplace with a control panel?
A gas fireplace control panel usually has a red igniter pilot knob and a control dial. The pilot knob should have the options “Off,” “Pilot” and, in some models, “On.” Here’s how to light a gas fireplace with a control panel. Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system.
How do you light a gas fireplace?
Locate the gas turn on knob near the back of the fireplace and turn the knob to the “On” position. Now find the temperature knob on the front of the fireplace and turn it to “Light”. Strike one of the long handled matches and place it through the small hole on the front of the gas logs that leads back to the pilot light.