For most recipes, a biscuit cutter that makes biscuits measuring between 2-3 inches is all you need.
Reviews you can trust.
Do biscuit cutters really matter?
Published Apr. 1, 2016.
What You Need To Know
Crafty home cooks punch out biscuits with old aluminum cans, overturned glasses, and even Mason jar rings. But using a makeshift cutter with rounded edges can compress the sides of dough, leading to misshapen biscuits. We prefer to use biscuit cutters, round cutting tools with sharp edges that make even cuts and thus produce tall, symmetrical biscuits. We tried eight sets, priced from about $10.00 to $60.00, all containing between four and 11 different-size rings. We used the cutters on a buttery biscuits dough, a wetter cream biscuits dough, and an elastic pierogi dough.
Though we tried every cutter in each set, most biscuit recipes call for a 2-, 2 1/2-, or 3-inch biscuit cutter. Oddly, none of the sets in our lineup hit these sizes on the mark when we measured them ourselves, but as long as they came close (within ⅛ inch), we didn’t dock them points. One smaller set missed the 3-inch mark by 1/4 inch, making pierogi that were far too small and overstuffed—a definite problem.
Sticking wasn’t an issue; all the cutters easily relinquished the doughs, especially when we dipped the ring in flour before cutting (as we usually call for in our recipes). Cutting integrity was a bigger concern, especially when working with elastic, stretchy pierogi dough and wet cream biscuits. Flimsier cutters made from thin, malleable metal or plastic easily warped under the pressure of our hands, making lopsided, misshapen biscuits and pierogi. Two sets with handles initially seemed like they’d give us a sturdier grip, but the handles forced testers to grip the cutter with a closed fist, limiting our range of motion and leaving us struggling to turn the cutter in the dough. Double-sided cutters were also out: Their sharp edges pushed painfully into our fingers as we used them. We preferred single-sided sets made from thicker metal or strong plastic, which allowed us to apply sturdy, even pressure for perfectly round biscuits.
Durability proved a high hurdle for some cutters. After just three rounds in the dishwasher, one set’s handles broke off. Another set that was made from tin rusted. Our favorite sets were made from stainless steel or tough, durable plastic. In the end, we returned to our old standby, the Ateco 5357 11-Piece Plain Round Cutter Set, which is made from tough stainless steel and didn’t warp or rust. This set comes with 11 sizes (a bit of overkill, perhaps) nested in a handy storage case and produced biscuits that were tall, even, and perfectly round.
How to Use a Biscuit Cutter : Kitchen Techniques & Recipes
FAQ
What size do you cut biscuits?
How do you measure a biscuit cutter?
What is the average size cookie cutter?
How do I choose a biscuit cutter?
It’s important to choose a cutter that is sharp and easily cuts through the dough to create uniform biscuits. Biscuit cutters are an essential baking tool that help give your baked goodies the perfect shape and size. However, with so many sizes available, choosing the right size for your recipe can become confusing.
How much do biscuit cutters cost?
We tried eight sets, priced from about $10.00 to $60.00, all containing between four and 11 different-size rings. We used the cutters on a buttery biscuits dough, a wetter cream biscuits dough, and an elastic pierogi dough. Though we tried every cutter in each set, most biscuit recipes call for a 2-, 2 1/2-, or 3-inch biscuit cutter.
Should you use a sharp biscuit cutter?
Using a good, sharp biscuit cutter is essential — not only does it ensure clean cuts, but it also minimizes the risk of pressing down too hard and inadvertently sealing the edges. Avoid the temptation to twist or turn the cutter as you press down, as this can compress the dough and inhibit its ability to rise evenly.
Do biscuit cutters make symmetrical biscuits?
But using a makeshift cutter with rounded edges can compress the sides of dough, leading to misshapen biscuits. We prefer to use biscuit cutters, round cutting tools with sharp edges that make even cuts and thus produce tall, symmetrical biscuits.