Johnny Trigg is a modern legend in the BBQ world. He swept through the competition circuit in the 1990’s with his wife Trish going by the team name The Smokin’ Triggers.
They are the only team to win the Jack Daniel’s World Championship BBQ Invitational twice. Needless to say, they’re kind of a big deal.
In this article, we’ll show you one of Johnny’s award-winning rib recipes, the ingredients he chooses, and the techniques with which he prepares them. Get ready to taste the best ribs you’ve ever made.
Johnny Trigg uses well-marbled ribs, trimmed to 3.5 inches with excess meat and membrane removed. He uses Rib Tickler Rub and black pepper. Firstly, let the ribs rest for 45 minutes before putting on the smoker. I’ve read he sprays/spritzes with apple juice hourly but I’ve never seen him do it.
Slicing and serving the pork ribs
Once you’ve pulled your ribs off the smoker, they should be good and glazed with a nice bark, and if you pull on two bones, they should begin to pull apart. Let them rest for ten to fifteen minutes.
Now it’s time for the reward. Turn the rack bone side up to prepare to cut the ribs. Bone side up makes it easier to see where to cut between the ribs.
With a very sharp slicing knife, slice cleanly between the bones being sure to leave a little meat on each side of each bone. From Our Shop
Make perfect cuts every time youre slicing brisket or any larger cut of meat
- FREE USA Shipping & Returns
- 45 Day Money-Back Guarantee
Plate and serve while warm.
The 3-2-1 method for cooking pork ribs
Johnny utilizes the 3-2-1 method when cooking his ribs. This technique calls for the ribs to be unwrapped directly on the smoker for three hours, wrapped tightly in foil for two additional hours, then unwrapped again for the final hour.
It’s hard to say who first invented this way of cooking ribs, but it’s gained a lot of momentum both in competition BBQ as well as backyard BBQ.
The 3-2-1 method is a surefire way to cook high-quality ribs on any style smoker.
Traditionally, Johnny uses a whole slab of spare ribs with tips and cartilage attached, but the 3-2-1 method works well with any style of pork ribs. Here, I’ve used racks of St. Louis cut and baby back ribs.
First off, run your hands over the rack of ribs to feel for any loose bone fragments or gritty parts leftover from the butcher block. Rinse it under cold water to get any grit off, and trim any excess fat, loose bone parts and shiners. From Our Shop
Trim the fat cap off a brisket or square up a rack of ribs in seconds.
- FREE USA Shipping & Returns
- 45 Day Money-Back Guarantee
Flip your ribs over to the back, non-meaty side, and remove the membrane. Most rib racks come with the membrane on unless you specifically ask for the butcher to remove it.
It’s important to remove the membrane because it becomes tough and chewy when left on to cook, and it prevents smoke and rub from penetrating and adding flavor to the meat.
After removing the membrane, sprinkle your dry rub liberally onto both sides of the rack. Be sure to press the rub into the meat with an open hand to help it adhere and penetrate. Once your ribs are fully dry rubbed, let sit at room temperature for 45 minutes to an hour.
While your ribs are resting, prepare your smoker to 250°F. A little bit of temperature fluctuation is fine here so long as you maintain as steady a temperature as you can between 225°F and 275°F. Once your smoker is up to temp, add your smoking wood.
I’m using a Backwoods Chubby 3400, so my fuel source is a bed of B&B all natural lump charcoal made from oak in the firebox.
Staying true to the Johnny Trigg method, stick with natural fuel sources like wood or lump charcoal. He uses one hardwood, pecan, and one fruitwood, cherry, giving a complex, layered flavor to the smoke.
Try to steer clear of briquettes that have unnecessary fillers and may influence the taste of the final product in an undesirable manner.
With my charcoal rolling and my smoker sitting at 250°F, I throw on 3 chunks of local hardwood, hickory, and 2 chunks of fruitwood. In this case, peach.
If you’ve been following this process closely, it should have timed up almost perfectly to where your smoker is steady at temp with clean smoke and your ribs have reached the proper amount of rest time at room temperature.
Place your ribs directly on the smoker grates with the bone side down.
Smoke your ribs uninterrupted for three hours.
Note – if your smoker does not have a built-in water pan, you may want to place a container of water inside to keep moisture in the cooking chamber, ensuring the ribs do not dry out. Another method is to spritz the ribs with a liquid like apple juice every hour during this portion of the cook.
Using heavy-duty aluminum foil, tear off a piece that is large enough to cover one entire rack of ribs – generally twice the length of the ribs themselves.
At the three hour mark, lay the aluminum sheet flat on a table. Spread the softened butter – I used ghee in this instance – on the foil the same length of your rib rack. If you’re using squeeze butter or margarine, a zig-zag pattern in this area will do.
Once your butter is down, sprinkle the brown sugar and one ounce of the tiger sauce on top. Lastly, squeeze the agave nectar or honey back and forth to cover the same area as the butter.
Mix the ingredients together using a gloved hand, making sure all ingredients are incorporated. If your mix seems too tacky, you can cut with a tablespoon of apple juice to thin it out to the desired consistency.
Place the ribs-meat side down into the glaze mixture. Using the same gloved hand, spread excess glaze onto the bone-side of the rib rack.
Wrap the foil tightly around the ribs leaving no pockets for air and steam to build up. Be careful not to tear the foil, but if you do notice a small rip, just double wrap the ribs with another layer of foil.
Place back onto the smoker uninterrupted for two more hours.
After two hours in the foil wrap, pull the ribs off the smoker, unwrap them then stick them back onto the grates. Mop the ribs with your favorite BBQ sauce and let them cook for another hour.
Use a towel or gloved hands to remove them from the grates as metal tongues can shred the glazed bark you’ve worked so hard to build.
The ribs are done when the internal temperature between the bones reaches 195°F. They should have a good bend to them and offer some resistance when the bones are pulled apart.
You want the ribs to have a little give, but not fall apart when you take them off the smoker. The temperature will carry-over and finish close to 200°F giving you a succulent, tender rib that stays on the bone.
If your rib meat literally falls apart off the bone when you pick it up, they’re overdone (but make for a mean shredded pork sandwich!)
Johnny Trigg of Smokin Triggers – Big Poppa Smokers Tips & Tricks: Classes & Ribs
FAQ
What does spritzing ribs do?
What is the Johnny Triggs method?
How to make Lloyd’s ribs?
How do pitmasters cook ribs?
How does Johnny Trigg smoke ribs?
Johnny Trigg uses the 3-2-1 slow-cooking technique to smoke ribs. It involves smoking your ribs unwrapped for 3 hours, followed by another 2 hours of smoking while wrapped, and a final 1 hour of smoking while unwrapped. That’s exactly what we intend to do. I trust all your ingredients are within reach. Now let’s get to it:
What makes Johnny Trigg ribs spicy?
A key element in the Johnny Trigg ribs recipe is the strong spicy seasonings he rubs on his spare ribs before he puts them in the smoker. The rub’s spicy ingredients include black pepper, red pepper, salt, and paprika. These ingredients contribute a fiery flavor profile that takes your barbecued pork ribs to the next level.
How do you make Johnny Trigg ribs?
Johnny trigg ribs recipe If you want to make Johnny Trigg Ribs all the ingredients and the recipe are here at BBQRubs.com. Johnny Trigg uses well-marbled ribs, trimmed to 3.5 inches with excess meat and membrane removed. He uses Rib Tickler Rub and black pepper. Firstly, let the ribs rest for 45 minutes before putting on the smoker. I’ve read
How does Johnny Trigg glaze his ribs?
Johnny Trigg glazes his ribs using a special mixture. He places the ribs front side up, then uses corn syrup, molasses and tomato sauce to glaze his ribs. We recommend doing the same. Place your ribs back on your smoker naked for one more hour. For a more complete meal, grab a pie tin.